Showing posts with label American Tombow. Show all posts
Showing posts with label American Tombow. Show all posts

Tuesday, 23 February 2021

SSS - Sleepover Club

HI All :-)

Today I have a cute little girl birthday card to share with you, such a sweet card to use as a Birthday Card or just for an I Love you to your Daughter card, or just a special card for a special young lady.




I coloured this image in way back when so I do apologise I don't have a Copic Marker list for you today.

I did stamp the image onto X-Press It Blending Card using Memento Tuxedo Black, using my Misti Stamping Tool. I then went in with my EK Success Cutterbee Scissors and fussy cut the image. After I fussy cut her I went around the outside with a Tombow Dual Black Marker.




I used American Crafts pink cardstock, and some American Crafts white cardstock for my matte layers and patterned papers are from American Crafts Dear Lizzy Day Dreamer collection. I cut down the little note piece, and the journal card. I trimmed down one of the top bits with the bows and adhered to the note piece. then I used some leftover bits to create the banners.





The sentiment is from Whimsy Stamps, I can't find these sentiments so I assume they are retired, they were a Digital Set., I ran this through my Sizzix Big Shot using a Lawn Fawn Stitched Circle die.




I used leftovers of the patterned papers to decorate the inside of the card.




I then adhered all the layers to a Couture Creations Card Base. 


Finally I used some Tonic Studios Nuvo Crystal Drops in Summer Sunrise.

 




I hope you have enjoyed my post today, if you have any questions feel free to send me a message or contact me via facebook (all links can be found below).

Watch the You Tube Video Here



Products Used On My Card (Affiliate Links Used Where Possible)



Copic Markers Used

No list today, sorry

Thanks for stopping by, Deni

CAMERA SET UP - FOR YOU TUBE VIDEOS ONLY
Blue Yeti Microphone
Sony Handycam HDR CX4-05
Tripod – Manfrotto MKCompactaCN-BK

S O C I A L MEDIA 
B L O G : https://ldli.co/e/3xky6x 
I N S T A G R A M : https://ldli.co/e/5dn20x
YOU TUBE: https://ldli.co/e/ej5l90 
F A C E B O O K: https://ldli.co/e/mjxn2r
PINTEREST: https://ldli.co/e/2l9zom



I was a 2018 Ambassador for Copic Marker Australia and NZ


Monday, 1 February 2021

Whimsy Stamps - Cute From Any Angle

It's New Release time over at Whimsy Stamps and as always they never let us down with gorgeousness!


Today I am using "Cute From Any Angle" Designed by Crissy Armstrong, I chose to use this image because it's totally adorable. I printed them out onto X-Press It Blending Cardstock using my Brother Laser Printer.


My original plan was to use both front and reverse of the image (both are included in your Digital Purchase), I coloured up the front of the image using Copic Markers, I wasn't sure at this stage what Was going to do, the back of the image was not jumping at me so I just put it to the side whilst I was working on the front. 



I used a white gel pen to add some extra details to the image, on the feet, the ears and the top of his boxer shorts. Once I was done I added some Derivan Kindyglitz to a few sections of the image. You will be able to see this in the end photos. 


I printed up the flower paper from Sweetness Digital Paper Pack also from Whimsy Stamps, this paper is actually brown, my colour printer is broken (so I assume as I've changed the cartridges and its still not printing the correct colours, I've done all the cleans etc.) Anyways so when I printed the paper it printed out in blue haha. I love it and it actually worked well with my card. 


I added a doily from my stash, some Easter ribbon from Daisy Chain (sorry can't find links for this it is years old). 

I cut some clouds from MFT Stamps Puffy Clouds dies - I have added some Whimsy links for their version also, I just used some leftover X-Press It Blending Cardstock for these as I like all my whites to be the same on a card. 




I used an old retired Digital Sentiment pack from Whimsy Stamps and cut one out using a Lawn Fawn Stitched Circle Die. 




Lastly using some leftover green cardstock I cut some grass using MFT Stamps Grassy Fields - I will again link up some Whimsy Stamps products for you to check out. 



At this point I was finished with the front of the card and left it overnight to dry, Whilst I should have been sleeping I had a ding ding moment and woke up and coloured the reverse bunny and added him to the inside of the card, so when you opened the card you could see the back of the bunny. 

I used leftover papers to decorate the inside of the card




I hope you have enjoyed my post today, if you have any questions feel free to send me a message or contact me via facebook (all links can be found below).

Watch the You Tube Video Here



Products Used On My Card (Affiliate Links Used Where Possible)



Copic Markers Used

Y02, Y06
V06, V09
B14, B16
T2/N2, T4, T6
0 Colorless Blender
G14

Thanks for stopping by, Deni

CAMERA SET UP - FOR YOU TUBE VIDEOS ONLY
Blue Yeti Microphone
Sony Handycam HDR CX4-05
Tripod – Manfrotto MKCompactaCN-BK

S O C I A L MEDIA 
B L O G : https://ldli.co/e/3xky6x 
I N S T A G R A M : https://ldli.co/e/5dn20x
YOU TUBE: https://ldli.co/e/ej5l90 
F A C E B O O K: https://ldli.co/e/mjxn2r
PINTEREST: https://ldli.co/e/2l9zom



I was a 2018 Ambassador for Copic Marker Australia and NZ


Thursday, 31 December 2020

Gerda Steiner - Deck The Halls Meowy Christmas

Hi Everyone,

Today I am sharing another Christmas Card with you using Deck The Halls from Gerda Steiner Designs, I love this stamp so much.






I coloured the image up quite a while ago so I don't have any Copic Markers lists for this card. I stamped the image onto X-Press It Blending Card using Memento Tuxedo Black and my Misti Stamping Tool. Copic Markers were used to colour the image up.

I cut down American Crafts Christmas Card and patterned papers from Kaisercraft Mistletoe 6.5" Paper Pad. 

I followed a sketch from Mojo Monday #499.



Sometimes you just need a little help with layout and these sketches are awesome to get your creativeness going. I haven't used any for a while and this is my second one now in a week of creative slump.

I decided to go through my container of images that I have coloured up previously and start getting them onto cards. 

I began by die cutting the image using Lawn Fawn Stitched Oval die which I ran through my Sizzix Big Shot. I did carefully cut the tail so that it didn't get cut off (if you slide the die underneath that part won't be cut.)




I trimmed the patterned paper down and layered them on top of American Crafts cardstock, finally adhering to a Couture Creations Card Base. 





The last step is to add Glitter glue to the bauble and the lights, I used Derivan Kindy Glitz however I could not find any links to this so have linked up a few other similar products. 


I stamped a sentiment from the same stamp set using a Lawn Fawn Acrylic Block and Memento Tuxedo Black Ink.




I decorated the inside of the card to match the front just using a few leftovers from the same paper pad.





I hope you have enjoyed my post today, if you have any questions feel free to send me a message or contact me via facebook (all links can be found below).

Watch the You Tube Video Here



Products Used On My Card (Affiliate Links Used Where Possible)



Copic Markers Used

Sorry no list today
Thanks for stopping by, Deni

CAMERA SET UP - FOR YOU TUBE VIDEOS ONLY
Blue Yeti Microphone
Sony Handycam HDR CX4-05
Tripod – Manfrotto MKCompactaCN-BK

S O C I A L MEDIA 
B L O G : https://ldli.co/e/3xky6x 
I N S T A G R A M : https://ldli.co/e/5dn20x
YOU TUBE: https://ldli.co/e/ej5l90 
F A C E B O O K: https://ldli.co/e/mjxn2r
PINTEREST: https://ldli.co/e/2l9zom



I was a 2018 Ambassador for Copic Marker Australia and NZ


Saturday, 19 December 2020

Time For Tea Designs Tennis Fun

Hi Everyone,

Sorry I haven't been around much lately.. needed some me time.

The Mum of a friend of mine asked me to make a friend of hers (did u get all that haha) a Tennis Birthday Card. I love this image from Time For Tea Designs, unfortunately this image is an old retired stamp so you won't be able to purchase it but it is definitely one of my favourites. 




I printed the image onto X-Press It Blending Cardstock using my Brother Laser Printer, I then ran the image through Sizzix Big Shot using a Lawn Fawn Stitched Circle Die. 




Using my Copic Markers I coloured the image up, I will have a full list of Copic Markers Used at the bottom of my blog post if you are looking for them. 

The Gold patterned cardstock is actually from my Erin Condren Planner bands packaging, I packed them all away and thought I would be able to use the packaging.. and I did :-)

I cut down some American Crafts Black Cardstock and some Kaisercraft Red Cardstock to create my matte layers. I adhered the patterned paper and the matte layers using my Scotch ATG. 


I ran some red scraps through my Big Shot using Kaisercraft alphabet lowercase (I can't find any links for these but will try and link up some other alphabet dies), I also used some black scraps to cut MFT Stamps Big Numbers. I adhered the alphas to my card using American Tombow Mono Multi. 


Using Lawn Fawn Wavy Sayings stamp set I stamped out the Happy Birthday using Ink on 3 Embossing Ink and Wow Embossing Powder Fine in Primary Apple Red. I had some vellum scraps in my bucket which I had prepped using EK Success Powder Tool ( I will link up a few different ones). I heated the embossing powder up and melted it using my Heat Tool. Finally I trimmed the sentiment down using my EK Success Cutterbee Scissors then gently added a very small amount of American Tombow Mono Multi to the back of each letter.




I used more of the matte layers to decorate the inside of my card. 





I hope you have enjoyed my post today, if you have any questions feel free to send me a message or contact me via facebook (all links can be found below).

Watch the You Tube Video Here

 

Products Used On My Card (Affiliate Links Used Where Possible)



Copic Markers Used 

W1, 0
C3, 0
E51, E53, E55, R20
Y21, Y23, E31
Y02, Y08
R27, R39


Thanks for stopping by, Deni

CAMERA SET UP - FOR YOU TUBE VIDEOS ONLY
Blue Yeti Microphone
Sony Handycam HDR CX4-05
Tripod – Manfrotto MKCompactaCN-BK

S O C I A L MEDIA 
B L O G : https://ldli.co/e/3xky6x 
I N S T A G R A M : https://ldli.co/e/5dn20x
YOU TUBE: https://ldli.co/e/ej5l90 
F A C E B O O K: https://ldli.co/e/mjxn2r
PINTEREST: https://ldli.co/e/2l9zom



I was a 2018 Ambassador for Copic Marker Australia and NZ


Sunday, 6 December 2020

Whimsy Stamps - It's A little Snowy

Hi Everyone,

Today I would like to share a card I made using an image from Whimsy Stamps Pollycraft collection called Snowy, she is a digital stamp that I have printed out onto X-Press It Blending Cardstock using my Brother Laser Printer.




Once I had her printed up I coloured her using Copic Markers, then ran the image through my Sizzix Big Shot using MFT Stamps Cross-Stitch Circle Stax.




Unfortunately this die is no longer for sale but this is what the dies looked like that I used. 



Using the leftover cardstock from my die cutting I used a EK Success Star Confetti Punch to punch out some stars. 





I printed some Digital Papers from Whimsy Stamps Winter's Magic Blue Paper Collection, I love Digital Papers because you can print them to the size you need, limit the hoarding of endless paper supplies and only print the amount that you actually need. 


I did follow a sketch for this card, my mind has been struggling with card layouts lately so these always help.  I used Sweet Sunday sketch Challenge 186.


I cut a matte layer from some coloured cardstock that I had in my stash, then cut a smaller size strip and bannered it up using my EK Success Cutterbee Scissors. I cut another matte layer this time using some American Crafts white cardstock and layered it on top of the aqua/mint cardstock. 



Using my Cutterpillar Trimmer I trimmed down the patterned papers so I could layer them leaving a small white gap between the two of them. I had this Christmas Tag on my desk leftover from another project so I added it to the top right corner.



I adhered all the layers alternating between Scotch ATG and Helmar Acid Free liquid adhesive for the small sections. I then adhered the layers to a Couture Creations Card Base.

Once I had all my stars adhered I used some Derivan Kindyglitz to coat them and make them all sparkly and glittery :-) I also added the glitter to the snow beneath her feet. I left the card over night to completely dry before putting it into the packaging. 






I hope you have enjoyed my post today, if you have any questions feel free to send me a message or contact me via facebook (all links can be found below).

Watch the You Tube Video Here

 

Products Used On My Card (Affiliate Links Used Where Possible)


Copic Markers Used

E44, E47, E49
C1, 0 Colorless Blender
RV63, RV66
E33, E39
BG10, BG13, BG15
C4, C6, C8

Thanks for stopping by, Deni

CAMERA SET UP - FOR YOU TUBE VIDEOS ONLY
Blue Yeti Microphone
Sony Handycam HDR CX4-05
Tripod – Manfrotto MKCompactaCN-BK

S O C I A L MEDIA 
B L O G : https://ldli.co/e/3xky6x 
I N S T A G R A M : https://ldli.co/e/5dn20x
YOU TUBE: https://ldli.co/e/ej5l90 
F A C E B O O K: https://ldli.co/e/mjxn2r
PINTEREST: https://ldli.co/e/2l9zom



I was a 2018 Ambassador for Copic Marker Australia and NZ