Yesterday my son and I were busy preparing the next round of Gift Tags to go out with my card orders.
I purchased some pre-made Parcel Tags from Kmart, they come in a variety of styles but I really wanted to try out colouring with my Prismacolor Pencils on Kraft card stock.
We stamped the images out using Memento Tuxedo Black, to start with we were using Lawn Fawn Acrylic blocks then realised for us to bulk batch them it would be a lot quicker to use the Misti.
I coloured the images up using my Prismacolor Pencils then went back in and stamped the Thank You onto the Signs.
Finally using a Uni-Ball Signo White Gel Pen I added some details to the images, I then used some twine to thread through the top of the tags.
I hope you have enjoyed my post today, if you have any questions feel free to send me a message or contact me via facebook (all links can be found below).
Watch the You Tube Video Here
Products Used On My Card (Affiliate Links Used Where Possible)
CAMERA SET UP - FOR YOU TUBE VIDEOS ONLY
Blue Yeti Microphone
Sony Handycam HDR CX4-05
Tripod – Manfrotto MKCompactaCN-BK
S O C I A L MEDIA
B L O G : http://angelhandmadepapercraft.blogspot.com.au/
I N S T A G R A M : http://instagram.com/angelhandmadepapercraft
YOU TUBE: http://www.youtube.com/c/AngelHandmadePapercraft
F A C E B O O K: http://www.facebook.com/angelhandmadepapercraft
PINTEREST: https://www.pinterest.com.au/angelhandmadepapercraft
I was a 2018 Ambassador for Copic Marker Australia and NZ
I am so excited to share with you my first 1 layer card, Lots of masking and hard work went into this one, and I won't be doing it anytime soon haha.
On all seriousness it was really great to do this card as I have wanted to do one for a while.
I started by preparing my X-Press It Blending Cardstock and laying out all my stamps to work out what I was going to do. I then cut down a piece of scrap paper around the same size and I stamped everything out using a Lawn Fawn acrylic block. I put my X-Press it Blending card into my Misti Stamping Tool and layed the piece of scrap that I stamped on in over the top of the Blending Card.
I looked at the scrap piece of stamping and worked out what needed to be stamped first, everything that is at the front needs to be stamped first, you then mask those off and stamp the next layer back.
So first of all I knew that the three penguins and the ball all needed to be stamped out first. I then worked out what I would need to create masks for to do the rest of my stamping. I knew I wanted the trees behind the penguins so I would need to create masks for all the penguins, thinking ahead I also realised I would need masks for the trees and the ball so I would be able to ink over the top of them to create my background.
I stamped the images that would need masks out onto another piece of scrap paper and used my EK Success Cutterbee scissors to fussy cut (right on the line) all of the images. I then used American Tombow Mono Multi to add adhesive to the backs. With Mono Multi it is permanent straight away and temporary if you leave it to dry.
With the masks for the trees I actually stamped those onto some post it notes because I realised I would need two, I left two post it notes stuck together and fussy cut them at the same time. I then added some more Mono Multi to the bottoms of those so I could completely adhered and create masks from them.
I stamped all my images out onto my X-Press It Blending Card, I left the masks on all the images then used another piece of scrap copy paper to tear and create a mask and give the separation between water and sand for my background.
I layed the mask down and inked up the sky first using Tumbled Glass and Salty Ocean Distress Inks, I then removed the mask from the background and blended the sand, I used Antique Linen and Tea Dye for this, with the Tea Dye I didn't blend it more just pounced it on to create the texture of the sand.
Finally I removed all the masks using my EK Success Cutterbee Scissors, I love the point of my scissors it allows me to carefully pull the masks up.
I coloured the images up using Copic Markers, careful not to touch the Distress Ink too much with my Copic tips. I added some details using Uni-Ball White Gel Pen.
I stamped the sentiment out onto the layout using Memento Tuxedo Black. I decided at this stage to cut my project down and add some layers behind it just using some plain card stocks from my stash.
I hope you have enjoyed my post today, if you have any questions feel free to send me a message or contact me via facebook (all links can be found below).
Watch the You Tube Video Here
Products Used On My Card (Affiliate Links Used Where Possible)
CAMERA SET UP - FOR YOU TUBE VIDEOS ONLY
Blue Yeti Microphone
Sony Handycam HDR CX4-05
Tripod – Manfrotto MKCompactaCN-BK
S O C I A L MEDIA
B L O G : http://angelhandmadepapercraft.blogspot.com.au/
I N S T A G R A M : http://instagram.com/angelhandmadepapercraft
YOU TUBE: http://www.youtube.com/c/AngelHandmadePapercraft
F A C E B O O K: http://www.facebook.com/angelhandmadepapercraft
PINTEREST: https://www.pinterest.com.au/angelhandmadepapercraft
I was a 2018 Ambassador for Copic Marker Australia and NZ
It's my Whimsy Stamps share day today and I am so excited to share with you PC Curly from the Digi Collection.
I love this little guy, he reminds me of my youngest step son haha.
I printed the image onto X-Press It Blending Cardstock using my Brother Laser Printer then coloured him up using Copic Markers. I added some details to the image using a White Uni-Ball Signo Gel Pen and added some Mod Podge Dimensional Magic to his goggles.
For the base of the card I cut some layers of plain cardstock from my stash and some patterned papers from American Crafts #Summer paper pad.
I ran two Spellbinders Nestabilities Labels Twenty-Two dies through my Sizzix Big Shot, I actually taped them together using washiest Tape so I could cut them from the same cardstock.
I cut some bits and pieces from the same paper pad including the sentiment using my Cutterpillar Pro and by EK Success Cutterbee Scissors. All of the adhering was done with Scotch ATG and Tombow Mono Multi.
Finally I adhered all the layers to a Couture Creations Card Base.
I hope you have enjoyed my post today, if you have any questions feel free to send me a message or contact me via facebook (all links can be found below).
Watch the You Tube Video Here
Products Used On My Card (Affiliate Links Used Where Possible)
CAMERA SET UP - FOR YOU TUBE VIDEOS ONLY
Blue Yeti Microphone
Sony Handycam HDR CX4-05
Tripod – Manfrotto MKCompactaCN-BK
S O C I A L MEDIA
B L O G : http://angelhandmadepapercraft.blogspot.com.au/
I N S T A G R A M : http://instagram.com/angelhandmadepapercraft
YOU TUBE: http://www.youtube.com/c/AngelHandmadePapercraft
F A C E B O O K: http://www.facebook.com/angelhandmadepapercraft
PINTEREST: https://www.pinterest.com.au/angelhandmadepapercraft
I was a 2018 Ambassador for Copic Marker Australia and NZ
Today I am sharing with you a quick colouring video using Princess with Apple from Paper Nest Dolls.
I used the Digital Stamp for my colouring today, so I used my Brother Laser Printer to print her onto X-Press It Blending Cardstock, I then coloured her up using Copic Markers.
All of the Copic Markers are listed below and I will have more details on the project I have used her on at a later date.
I hope you have enjoyed my post today, if you have any questions feel free to send me a message or contact me via facebook (all links can be found below).
Watch the You Tube Video Here
Products Used On My Card (Affiliate Links Used Where Possible)
CAMERA SET UP - FOR YOU TUBE VIDEOS ONLY
Blue Yeti Microphone
Sony Handycam HDR CX4-05
Tripod – Manfrotto MKCompactaCN-BK
S O C I A L MEDIA
B L O G : http://angelhandmadepapercraft.blogspot.com.au/
I N S T A G R A M : http://instagram.com/angelhandmadepapercraft
YOU TUBE: http://www.youtube.com/c/AngelHandmadePapercraft
F A C E B O O K: http://www.facebook.com/angelhandmadepapercraft
PINTEREST: https://www.pinterest.com.au/angelhandmadepapercraft
I was a 2018 Ambassador for Copic Marker Australia and NZ
A little Copic Colouring to share with you today using Arabian Princess from Paper Nest Dolls.
I used the Digital Version of this image (I will have all the picture links below), printed it onto X-Press It Blending Card using my Brother Laser Printer.
I added details using Uni-Ball White Gel Pen and Wink Of Stella Clear.
I hope you have enjoyed my post today, if you have any questions feel free to send me a message or contact me via facebook (all links can be found below).
Watch the You Tube Video Here
Products Used On My Card (Affiliate Links Used Where Possible)
CAMERA SET UP - FOR YOU TUBE VIDEOS ONLY
Blue Yeti Microphone
Sony Handycam HDR CX4-05
Tripod – Manfrotto MKCompactaCN-BK
S O C I A L MEDIA
B L O G : http://angelhandmadepapercraft.blogspot.com.au/
I N S T A G R A M : http://instagram.com/angelhandmadepapercraft
YOU TUBE: http://www.youtube.com/c/AngelHandmadePapercraft
F A C E B O O K: http://www.facebook.com/angelhandmadepapercraft
PINTEREST: https://www.pinterest.com.au/angelhandmadepapercraft
I was a 2018 Ambassador for Copic Marker Australia and NZ
Today I am sharing with you a card I created using Penguin Beach Chair, designed by Crissy Armstrong for Whimsy Stamps.
I used the Digital Version of this stamp, however it is available as a Rubber Stamp. Links will be in picture links below.
I printed the image onto X-Press It Blending Cardstock using my Brother Laser Printer, I then coloured the image up using Copic Markers.
Patterned papers are from Bo Bunny The Avenues Collection, I trimmed them up using my Cutterpillar Pro, I ran the bottom layer through my Sizzix Big Shot using my Sizzix Big Shot. I adhered the patterned paper using Glue Dots Permanent Tape Runner. I cut some Black American Crafts Cardstock and some blue Canson card stock for my bottom layers and adhered the patterned papers to those.
I stamped the sentiment from To The Beach (this is one of my very first Whimsy Stamps so it is super retired) using Memento Tuxedo Black and my Misti Stamping Tool.. to make sure I stamped it exactly in the right place I put the image into my Misti then layed some acetate over the top which I stamped on first and then once I knew it was in the right place I removed the acetate and stamped onto the image piece.
I Stamped out the thongs and the sunglasses from the same stamp set using Memento Tuxedo black and coloured them up using Copic Markers, then fussy cut them using EK Success Cutterbee scissors, I do own the dies but I wanted them to have no white border.
Finally I decided my card needed more so I stamped some shells out using Memento Rich Cocoa and an acrylic block. Some how whilst doing all this I managed to get a stamped shell onto my Penguin, I totally freaked out and tried to remove it using a sand eraser.. this didn't work so well, I ended up finding a Beach Ball in my MFT Stamps Penguins In Paradise stamp set, I stamped it out onto blending card coloured it with Copic Markers and fussy cut it using my Cutterbee Scissors. I used a Penblade to cut around the Penguin arm and slide the ball underneath so it was still covering up that horrible boo boo.
I then adhered all the other elements using American Tombow Mono Multi Liquid Adhesive.
I finally adhered all my layers to a Couture Creations Card Base using Scotch ATG.
I hope you have enjoyed my post today, if you have any questions feel free to send me a message or contact me via facebook (all links can be found below).
Watch the You Tube Video Here
Products Used On My Card (Affiliate Links Used Where Possible)
CAMERA SET UP - FOR YOU TUBE VIDEOS ONLY
Blue Yeti Microphone
Sony Handycam HDR CX4-05
Tripod – Manfrotto MKCompactaCN-BK
S O C I A L MEDIA
B L O G : http://angelhandmadepapercraft.blogspot.com.au/
I N S T A G R A M : http://instagram.com/angelhandmadepapercraft
YOU TUBE: http://www.youtube.com/c/AngelHandmadePapercraft
F A C E B O O K: http://www.facebook.com/angelhandmadepapercraft
PINTEREST: https://www.pinterest.com.au/angelhandmadepapercraft
I was a 2018 Ambassador for Copic Marker Australia and NZ
Today I am sharing with you PC Dude from Whimsy Stamps Digital Collection.
I printed the image onto X-Press It Blending Cardstock using my Brother Laser Printer then coloured him up using Copic Markers.
I fussy cut the image using my EK Success Cutterbee Scissors then ran around the outside of the image using a dual ended Tombow black marker. This finishes off the images and makes sure there is no white edge showing.
I ran through 2 dies in my Sizzix Big Shot - MFT Puffy Clouds and Lawn Fawn Stitched Circle. For the clouds I used some leftover X-Press It Card and for the circle I used American Crafts card stock.
I then cut a few layers of coloured card stock and some patterned paper using my Cutterpillar Pro, all the layers were adhered using Scotch ATG. I cut the heat wave and the ice cream cone from the same patterned papers I used earlier. This is the American Crafts #Summer paper pad. I used some Uni-ball gel pen to add details to the image and I added glossy accents to the glasses.
I used some leftover papers to create some banners for the top of the card. I also used the same paper pad to decorate the inside of the card.
I seriously love the way my card turned out :-) One of my favourite cards I have made.
I hope you have enjoyed my post today, if you have any questions feel free to send me a message or contact me via facebook (all links can be found below).
Watch the You Tube Video Here
Products Used On My Card (Affiliate Links Used Where Possible)
CAMERA SET UP - FOR YOU TUBE VIDEOS ONLY
Blue Yeti Microphone
Sony Handycam HDR CX4-05
Tripod – Manfrotto MKCompactaCN-BK
S O C I A L MEDIA
B L O G : http://angelhandmadepapercraft.blogspot.com.au/
I N S T A G R A M : http://instagram.com/angelhandmadepapercraft
YOU TUBE: http://www.youtube.com/c/AngelHandmadePapercraft
F A C E B O O K: http://www.facebook.com/angelhandmadepapercraft
PINTEREST: https://www.pinterest.com.au/angelhandmadepapercraft
I was a 2018 Ambassador for Copic Marker Australia and NZ
