Kindred Stamps - Day Of The Dead

Hey Everyone,

Well this is my last Video Design Team post as my term finishes with them at the end of this month, I have had an awesome experience with this team and have loved all the stamps I have had the opportunity to work with.

For my post today I am using Day Of The Dead, such a funny stamp set to use.

I started by laying the images I wanted to use together in my Misti Stamping Tool, I wanted to try and create a scene and was thinking I may need to do some masking but I didn't end up needing to.

I wanted to make a golden walk way, so I stamped all my images out using Memento Tuxedo Black onto X-Press It Blending Cardstock. I left them in my Misti incase I screwed up my colouring and needed to stamp them again lol.

I used a Mechanical Pencil to sketch out the walkway, erasing bits and pieces and tidying up as I went. I then used my Copic Markers to start colouring and blending out the background, making sure not to colour over the pencil as it would become "trapped" under the Copic Markers.  I used an eraser as I got to the second layer so I knew everything was okay.

Once I had the background done I coloured the walkway blending from the outside in. I am pretty happy with the way it turned out.

I now knew that I hadn't screwed up the background so was ready to begin colouring all the images up. I have all the Copic Markers linked up below and listed underneath the picture links.

I cut the colouring piece down to size using my Cutterpillar Pro. I cut a piece of American Crafts black cardstock down so it was a little bigger than the picture piece.

I turned the black cardstock over so I was using the reverse side with no pattern indented in it. I used the skull stamp from the stamp set and some Archival Brilliance Moonlight White ink with a Lawn Fawn Acrylic block and all the way around the outside of the cardstock. I wasn't worried about the centre as I knew it would all be covered up. I allowed this piece to dry (it didn't take long as it is warm here at the moment) If you are worried you can hit it quickly with a heat gun.

I then adhered my colouring to the black skull stamped piece using Scotch ATG.

I am super happy with the way my card turned out, I thank you for coming and joining me on my Kindred Stamps journey.

I hope you have enjoyed my post today, if you have any questions feel free to send me a message or contact me via facebook (all links can be found below).

Watch the You Tube Video Here



Products Used On My Card (Affiliate Links Used Where Possible)



Copic Markers Used

C6. C8. C10
E33, E35, E37
E40, E41
E51, E53, E55, R20, R21
B91, B93, B95
R35, R37
E23, E25, E27
BV31, BV34, BV13
YR20, YR21, YR23, YR24, YR27
T3

Thanks for stopping by, Deni

CAMERA SET UP - FOR YOU TUBE VIDEOS ONLY
Blue Yeti Microphone
Sony Handycam HDR CX4-05
Tripod – Manfrotto MKCompactaCN-BK

S O C I A L MEDIA 
B L O G : http://angelhandmadepapercraft.blogspot.com.au/
I N S T A G R A M : http://instagram.com/angelhandmadepapercraft
YOU TUBE: http://www.youtube.com/c/AngelHandmadePapercraft
F A C E B O O K: http://www.facebook.com/angelhandmadepapercraft
PINTEREST: https://www.pinterest.com.au/angelhandmadepapercraft


I was a 2018 Ambassador for Copic Marker Australia and NZ

Whimsy Stamps - Sylvia Zet - Cindy

Omg you guys,

I am so super excited to share with you one of the new Sylvia Zet images over at Whimsy Stamps, this is Cindy and she is my absolute favourite so far :-)

I printed her using my Brother Laser Printer onto X-Press It Blending Cardstock so I was able to colour using Copic Markers.

I ran the image through my Sizzix Big Shot using Lawn Fawn Stitched Circle Die, these are my favourite circle dies, always perfectly sized just for me.

I used patterned papers from a Kmart paper pad, and cardstocks from American Crafts and some other unknown papers.

I used a sentiment from Studio Katia Birthday Greetings, I inked it up using Memento Tuxedo Black and used a Lawn Fawn Acrylic Block to stamp it out onto some leftover X-Press It Blending Cardstock which I then cut down to size using EK Success Cutterbee Scissors.

I added Wink Of Stella Clear to her wings and finally I used my Silhouette Pick Me Up Tool to add some stars to my card, the stars are leftovers from other projects.

I adhered all the layers to a Couture Creations card base and decorated the inside of my card to match.

I hope you have enjoyed my post today, if you have any questions feel free to send me a message or contact me via facebook (all links can be found below).

Watch the You Tube Video Here






  Products Used On My Card (Affiliate Links Used Where Possible)



Copic Markers Used

E74, E77, E79
T6, T8, T10
YR21, YR24, YR27
V12, V15, V17
RV14, RV19
B12, B16
E000, E00, E21, E11, E04, R20
V91, V93, V95
RV91, RV93, RV95
RV00, RV0000, B0000
E50, E53

Thanks for stopping by, Deni

CAMERA SET UP - FOR YOU TUBE VIDEOS ONLY
Blue Yeti Microphone
Sony Handycam HDR CX4-05
Tripod – Manfrotto MKCompactaCN-BK

S O C I A L MEDIA 
B L O G : http://angelhandmadepapercraft.blogspot.com.au/
I N S T A G R A M : http://instagram.com/angelhandmadepapercraft
YOU TUBE: http://www.youtube.com/c/AngelHandmadePapercraft
F A C E B O O K: http://www.facebook.com/angelhandmadepapercraft
PINTEREST: https://www.pinterest.com.au/angelhandmadepapercraft


I was a 2018 Ambassador for Copic Marker Australia and NZ

How To Video - Cleaning Copic Markers

Hi Everyone,

Just a quick post tonight, I have just loaded onto my You Tube Channel a How To Video on how I clean and refill my Copic Markers..

I hope you have enjoyed my post today, if you have any questions feel free to send me a message or contact me via facebook (all links can be found below).

Watch the You Tube Video Here


Products Used On My Card (Affiliate Links Used Where Possible)



Copic Markers Used

E000, E00, E21, E11, E04, R20 - Refills for all used in this video also.
Thanks for stopping by, Deni

CAMERA SET UP - FOR YOU TUBE VIDEOS ONLY
Blue Yeti Microphone
Sony Handycam HDR CX4-05
Tripod – Manfrotto MKCompactaCN-BK

S O C I A L MEDIA 
B L O G : http://angelhandmadepapercraft.blogspot.com.au/
I N S T A G R A M : http://instagram.com/angelhandmadepapercraft
YOU TUBE: http://www.youtube.com/c/AngelHandmadePapercraft
F A C E B O O K: http://www.facebook.com/angelhandmadepapercraft
PINTEREST: https://www.pinterest.com.au/angelhandmadepapercraft


I was a 2018 Ambassador for Copic Marker Australia and NZ

La La Land Crafts - Knight Luka

Good Morning Everyone,

Today I am here to share with you a new to me image from La La Land Crafts, this is Knight Luka he is available as a Digital Stamp and as a Rubber Stamp.

I purchased the Digital Stamp during the last sale, such a great image to colour up. I printed the image and the sentiment onto X-Press It Blending Card using Copic Markers.

I fussy cut the image using EK Success Cutterbee Scissors then ran around the outside using a Tombow black dual end marker holding the marker from back to the front so as to not accidentally get any ink on the actual image.

I grabbed a pre-made card base from my stash and using a Mini Ink Blending Tool and Tim Holtz Ranger Wilted Violet Oxide Ink I made a circular motion to the centre of the card.

I used Club La La Land Crafts July 2016 Kit, these items are now available to purchase separately so have linked them all up. I used the Castle Border Die and the Bricks die which I ran through my Sizzix Big Shot using American Crafts Cardstock. I ran them through a couple of times in black and grey cardstock.

I adhered one grey on top of one black castle using American Tombow Mono Multi Liquid Adhesive, then adhered it to the back of my image. I then adhered two of the brick dies together just using some washing tape so I could get them aligned before adhering.

I inlayed some of the black bricks to the grey die cut using the liquid adhesive.

I then used the liquid adhesive to adhered the die cuts, the image and sentiment to the card base.

I also used some Wink Of Stella Clear to bling up my card.

I hope you have enjoyed my post today, if you have any questions feel free to send me a message or contact me via facebook (all links can be found below).

Watch the You Tube Video Here




  Products Used On My Card (Affiliate Links Used Where Possible)



Copic Markers Used

E000, E00, E21, E11, E04, R20
N1, N3, N5
R24, R27, R29
V04, V06, V09
E55, E57, E59
0 Colorless Blender

Thanks for stopping by, Deni

CAMERA SET UP - FOR YOU TUBE VIDEOS ONLY
Blue Yeti Microphone
Sony Handycam HDR CX4-05
Tripod – Manfrotto MKCompactaCN-BK

S O C I A L MEDIA 
B L O G : http://angelhandmadepapercraft.blogspot.com.au/
I N S T A G R A M : http://instagram.com/angelhandmadepapercraft
YOU TUBE: http://www.youtube.com/c/AngelHandmadePapercraft
F A C E B O O K: http://www.facebook.com/angelhandmadepapercraft
PINTEREST: https://www.pinterest.com.au/angelhandmadepapercraft


I was a 2018 Ambassador for Copic Marker Australia and NZ

Kindred Stamps - Ocean Royalty

Hi All,

Today I am sharing with you my last New Release week card for Kindred Stamps, I have one more weekly card and that is my term finished. I have thoroughly enjoyed working with the team at Kindred Stamps and hope to work with them again.

The entire Kindred Stamps April release will be available Friday, April 26th at 8am PST/11am EST. Be sure to subscribe to the Kindred Stamps blog to see a daily line up of sneak peeks from our amazing Design Team and see the full product release on Friday! Come join the Fan Club and release event to be part of the release fun, and you may just win some Kindred Stamps credit!!

The New Release Stamp Set I am working with today is Ocean Royalty, such an adorable set to play with. Stamp set will be available in a couple of days, you can check it out here on the Kindred Stamps Shop when it releases

I stamped the images onto X-Press It Blending Cardstock using Memento Tuxedo Black and my Misti Stamping Tool, I then coloured the images up using Copic Markers.

I fussy cut the stamped images using EK Success Cutterbee Scissors, these are my go to fussy cutting scissors because they have a nice sharp point to them which makes it so much easier.

I used a Mama Elephant 3D Pop Up Card die and some American Crafts Cardstock, I ran this through my Sizzix Big Shot twice and adhered the two together using Scotch ATG.

I also ran the insert piece through twice using the same cardstock.

I firstly adhered all the images to the box using Glue Dots temporary adhesive dots, I did this to make sure I had my layout exactly as I wanted, I then went back in with American Tombow Mono Multi Liquid adhesive.

I ran La La Land Crafts Castle Border die through using some Kraft cardstock and the Sea Bubbles border using the same blue cardstock from the box.

I ran the bubbles border through a few times and added those to the outside flaps.

The sentiment I cut down using my Tim Holtz Guillotine.


I hope you have enjoyed my post today, if you have any questions feel free to send me a message or contact me via facebook (all links can be found below).

Watch the You Tube Video Here



Products Used On My Card (Affiliate Links Used Where Possible)




Copic Markers Used

BV11, BV13, BV17
R14, R17, R35
E000, E00 E11, E13, R20
G03, G07

E000, E00, E21, E11, E04, R20
B21, B24, B26
YR21, YR24, YR27
C6, C8, C10

E000, E00, E21, E11, E-4, R20
BG01, BG05, BG07
E37,YR21, YR24, YR27
N1, N3, 0

BV23, BV25

R35, R37
V20, V22, V25, V28
V04, V06, V09
BG23, N1, N3, 0
C4, C6, C8
B04

Thanks for stopping by, Deni

CAMERA SET UP - FOR YOU TUBE VIDEOS ONLY
Blue Yeti Microphone
Sony Handycam HDR CX4-05
Tripod – Manfrotto MKCompactaCN-BK

S O C I A L MEDIA 
B L O G : http://angelhandmadepapercraft.blogspot.com.au/
I N S T A G R A M : http://instagram.com/angelhandmadepapercraft
YOU TUBE: http://www.youtube.com/c/AngelHandmadePapercraft
F A C E B O O K: http://www.facebook.com/angelhandmadepapercraft
PINTEREST: https://www.pinterest.com.au/angelhandmadepapercraft


I was a 2018 Ambassador for Copic Marker Australia and NZ

Whimsy Stamps - Bird Swing

We are almost at mid month release for Whimsy Stamps, how fast is this month going already..

I have chosen to create a card using of the April 2018 releases - this is Bird Swing, such a sweet image.

I printed the image onto X-Press It Blending Cardstock using my Brother Laser Printer, this allowed me to colour the images using Copic Markers.

I missed the colouring of the birds on my video - apologies my camera has stolen the footage and is hiding it from me haha.

I used some ribbons and lace from my stash, I have been a hoarder of these things for so long and never seem to use them, this project seemed perfect for this card.

Patterned papers are from Basic Grey Mint Julep Collection 6x6 Paper Pad, I really love the softness of the colours and patterns in this pad.

I paired the papers up with Nuvo Crystal Drops Antique Rose and Bubblegum Blush.

To pop the image up I used Glue Dots Repositionable Mounting Tape, It wasn't too thick that it gave my card bulk but was thick enough to pop it up off my card a little.

I layered the patterned papers up with American Crafts White Cardstock and adhered them using Scotch ATG to a Couture Creations Card Base.

I hope you have enjoyed my post today, if you have any questions feel free to send me a message or contact me via facebook (all links can be found below).

Watch the You Tube Video Here



  Products Used On My Card (Affiliate Links Used Where Possible)



Copic Markers Used

E30, E31
YR24, YR27
R81, R83, R85
G07, G28
E51, E53, E55, E57
R20, 0

Thanks for stopping by, Deni

CAMERA SET UP - FOR YOU TUBE VIDEOS ONLY
Blue Yeti Microphone
Sony Handycam HDR CX4-05
Tripod – Manfrotto MKCompactaCN-BK

S O C I A L MEDIA 
B L O G : http://angelhandmadepapercraft.blogspot.com.au/
I N S T A G R A M : http://instagram.com/angelhandmadepapercraft
YOU TUBE: http://www.youtube.com/c/AngelHandmadePapercraft
F A C E B O O K: http://www.facebook.com/angelhandmadepapercraft
PINTEREST: https://www.pinterest.com.au/angelhandmadepapercraft


I was a 2018 Ambassador for Copic Marker Australia and NZ

Whimsy Stamps - PC Dotty

Hi Everyone,

Today I am working with Whimsy Stamps and I would like to share with you another of the new April 2018 Images. This is PC Dotty.

I printed her out onto X-Press It Blending Cardstock using my Brother laser printer, this allows me to be able to colour with Copic Markers without any bleeding.

I will have all the Copic Markers used in the links below and also a written list at the end of the post.

I have used patterned papers from Lilybee Design Pinwheel 6x6 Paper Pad, I cut them to size using Cutterpillar Pro and I used a mixture of adhesives - Scotch ATG and American Tombow Mono Multi Liquid Adhesive.

I added all the layers to a pre-made card base from Couture Creations used Scotch ATG.

Finally once my card was all together I added some Tonic Studios Nuvo Crystal Drops in Ripened Pumpkin, Dandelion Yellow and Caribbean Ocean.

I also added some Wink Of Stella to her hat.


I hope you have enjoyed my post today, if you have any questions feel free to send me a message or contact me via facebook (all links can be found below).

Watch the You Tube Video Here




Products Used On My Card (Affiliate Links Used Where Possible)



Copic Markers Used

E000, E00, E21, E11, E04, R20
Y11, Y18
YR20, YR24
E74, E77, E79
BG13, BG57

Thanks for stopping by, Deni

CAMERA SET UP - FOR YOU TUBE VIDEOS ONLY
Blue Yeti Microphone
Sony Handycam HDR CX4-05
Tripod – Manfrotto MKCompactaCN-BK

S O C I A L MEDIA 
B L O G : http://angelhandmadepapercraft.blogspot.com.au/
I N S T A G R A M : http://instagram.com/angelhandmadepapercraft
YOU TUBE: http://www.youtube.com/c/AngelHandmadePapercraft
F A C E B O O K: http://www.facebook.com/angelhandmadepapercraft
PINTEREST: https://www.pinterest.com.au/angelhandmadepapercraft


I was a 2018 Ambassador for Copic Marker Australia and NZ

Whimsy Stamps - Sweetheart

Today I have a Whimsy Stamps card to share with you, this image was from a couple of releases ago but I had her coloured up on my desk ready to be put on a card.

I don't have video of the colouring, however I do have the card process so feel free to watch below and if you haven't already I would love for you to subscribe.

This image is called Sweetheart, you can find links to purchase in the picture links below.

I used patterned papers from American Crafts #summer paper pad, this is the last few sheets of this paper, I think I have like 2 6x6 Pages left which is always pretty exciting haha.

I coloured the image up using Copic Markers after printing her onto X-Press It Blending Card, this is my go to cardstock for Copic Markers.

I cut the image to size using my Tim Holtz Guillotine and cut all my papers to size using my Cutterpillar Pro. I only used the one adhesive on my card - my scotch ATG.

Added a doily inbetween the layers and cut all the excess pieces off before adhering to a Couture Creations card base.

Finally to finish off my card I added some clear Wink Of Stella.

I hope you have enjoyed my post today, if you have any questions feel free to send me a message or contact me via facebook (all links can be found below).

Watch the You Tube Video Here




Products Used On My Card (Affiliate Links Used Where Possible)




Copic Markers Used

E000, E00, E21, E11, E04, R20
V12, V15, V17
Y32, Y35, Y38
BG02, BG05, BG07
R30, R32
Y21, Y26
N1, N3, 0
YR21, Y35

Thanks for stopping by, Deni

CAMERA SET UP - FOR YOU TUBE VIDEOS ONLY
Blue Yeti Microphone
Sony Handycam HDR CX4-05
Tripod – Manfrotto MKCompactaCN-BK

S O C I A L MEDIA 
B L O G : http://angelhandmadepapercraft.blogspot.com.au/
I N S T A G R A M : http://instagram.com/angelhandmadepapercraft
YOU TUBE: http://www.youtube.com/c/AngelHandmadePapercraft
F A C E B O O K: http://www.facebook.com/angelhandmadepapercraft
PINTEREST: https://www.pinterest.com.au/angelhandmadepapercraft


I was a 2018 Ambassador for Copic Marker Australia and NZ

Whimsy Stamps - Penguin Cake

Made this card a few months ago, it has been sitting in my You Tube for a while because I forgot to do the You Tube Video hahah.

So here it is. This is Whimsy Stamps Penguin's Cupcake, Super Adorable.

I printed him onto X-Press It Blending Cardstock using my Brother Label Printer and coloured him up using Copic Markers, sorry I don't have a list of those for this project.

I used patterned papers from Basic Grey Mint Julep Collection, the plain papers are also from the same paper pad. I added a doily from my stash on top of the papers.

I then ran the image through my Sizzix Big Shot using a Lawn Fawn Stitched Square die.

Finally I used some Nuvo Crystal Drops in Violet Galaxy. I then added all the layers to a Couture Creations Card Base.



I hope you have enjoyed my post today, if you have any questions feel free to send me a message or contact me via facebook (all links can be found below).

Watch the You Tube Video Here



Products Used On My Card (Affiliate Links Used Where Possible)






Thanks for stopping by, Deni

CAMERA SET UP - FOR YOU TUBE VIDEOS ONLY
Blue Yeti Microphone
Sony Handycam HDR CX4-05
Tripod – Manfrotto MKCompactaCN-BK

S O C I A L MEDIA 
B L O G : http://angelhandmadepapercraft.blogspot.com.au/
I N S T A G R A M : http://instagram.com/angelhandmadepapercraft
YOU TUBE: http://www.youtube.com/c/AngelHandmadePapercraft
F A C E B O O K: http://www.facebook.com/angelhandmadepapercraft
PINTEREST: https://www.pinterest.com.au/angelhandmadepapercraft


I was a 2018 Ambassador for Copic Marker Australia and NZ

Whimsy Stamps - RS Cinnamon & Bunnies

Hi everyone,

Today I am here to share with you a card for Whimsy Stamps, this is one i've had sitting on my desk for a couple of weeks but for some reason forgot to share it :-)

I do have a video, unfortunately near the end it cuts out but I do have photos of the end card so you can see the end process.

Patterned papers are from Pebbles Party with Amy Locurto Rainbow Collection. I used some American Crafts cardstocks to mat the layers.

I added Wink of Stella to her skirt and the flower in her hair to pretty her up.

I finished the card off using some Tonic Studios Nuvo Crystal Drops in Silver Moondust, Ripened Pumpkin and English Mustard.


I hope you have enjoyed my post today, if you have any questions feel free to send me a message or contact me via facebook (all links can be found below).

Watch the You Tube Video Here


  Products Used On My Card (Affiliate Links Used Where Possible)



Copic Markers Used

E000, E00, E21, E11, E04, R20
E44, E47, E49
N1, N3, N5
Y08, YR14, R35
W00, W2
Y08, YR14, R35
B02, B04, B06

Thanks for stopping by, Deni

CAMERA SET UP - FOR YOU TUBE VIDEOS ONLY
Blue Yeti Microphone
Sony Handycam HDR CX4-05
Tripod – Manfrotto MKCompactaCN-BK

S O C I A L MEDIA 
B L O G : http://angelhandmadepapercraft.blogspot.com.au/
I N S T A G R A M : http://instagram.com/angelhandmadepapercraft
YOU TUBE: http://www.youtube.com/c/AngelHandmadePapercraft
F A C E B O O K: http://www.facebook.com/angelhandmadepapercraft
PINTEREST: https://www.pinterest.com.au/angelhandmadepapercraft


I was a 2018 Ambassador for Copic Marker Australia and NZ

Magnolia - Tilda Boxing

Good Morning all,

Daylight Savings Time Started here in Australia this morning and I was up bright and early before work so managed to pump out this Magnolia - Boxing Tilda card.

I had her coloured up a few weeks ago so it was just a matter of getting the card together, I found this gorgeous pink paper pad from Kaisercraft and thought it would be perfect for this card.

I cut all the papers using my Cutterpillar Pro and adhered them to a Twiddleybitz card base (these are no longer available for sale.

I hope you have enjoyed my post today, if you have any questions feel free to send me a message or contact me via facebook (all links can be found below).



Products Used On My Card (Affiliate Links Used Where Possible)




Copic Markers Used
E000, E00, E21, E11, E04, R20
B91, B93, B95, B97, W1
E23, E27, E29
V12, V15, V17
R81, R83, R85
C0, C3, 0
W1, W3,0

Thanks for stopping by, Deni

CAMERA SET UP - FOR YOU TUBE VIDEOS ONLY
Blue Yeti Microphone
Sony Handycam HDR CX4-05
Tripod – Manfrotto MKCompactaCN-BK

S O C I A L MEDIA 
B L O G : http://angelhandmadepapercraft.blogspot.com.au/
I N S T A G R A M : http://instagram.com/angelhandmadepapercraft
YOU TUBE: http://www.youtube.com/c/AngelHandmadePapercraft
F A C E B O O K: http://www.facebook.com/angelhandmadepapercraft
PINTEREST: https://www.pinterest.com.au/angelhandmadepapercraft


I was a 2018 Ambassador for Copic Marker Australia and NZ

La La Land Crafts - Singing Marci

Good Evening all,
Today I have something fun to share with you, a little fun crafting for a change.

I was contacted by someone asking if I could make them some cards, so this is one of those.

It needed to be a 16th Birthday Card for a little Sister, apparently she likes to sing so I knew I wanted to use this stamp from La La Land Crafts called Singing Marci.

She is no longer available to purchase in Digital Form which is how I have her although I have found a few shops that still have in Rubber form so have linked those up.

I printed her up onto X-Press It Blending Card using my Brother Laser Printer so I was able to Copic colour her, I will have all the colours listed below.

Once I had her all coloured up I decided to fussy cut her using my EK Success Cutterbee Scissors, I then ran around the edge using my Tombow Dual Ended Marker. I always run from the back so I don't accidentally get marker on the front of my image.

I added some Clear Wink of Stella to her dress and her head band.

I ran my favourite numbers dies - MFT Big Numbers through my Sizzix Big Shot just using some leftover X-Press Card (because I wanted to Copic Marker it so It would be the same purple. Unfortunately I have somehow lost some of the numbers .. totally disappointed and of course they are now retired.. oh well what can you do.

I cut the treble clef and the notes using dies from La La Land Crafts Heart Treble Die Set, I used some glitter card stock that I had.  I ran the music and the numbers through again with some American Crafts Black Cardstock so I could bring them up off the cardstock a little.
Patterned papers are from my stash.

I cut a large piece of the American Crafts Black Cardstock to use as a matting under the patterned paper.

Using my Scotch ATG I adhered all the big layers to a Couture Creations Card Base and American Tombow Mono Multi Liquid Adhesive to the smaller sections. I decorated the inside of the card to match.

I hope you have enjoyed my post today, if you have any questions feel free to send me a message or contact me via facebook (all links can be found below).

Watch the You Tube Video Here




Products Used On My Card (Affiliate Links Used Where Possible)



Copic Markers Used

E000, E00, E21, E11, E04, R20
V04, V06, V09
N0, N2, N4
C6, C8, C10

Thanks for stopping by, Deni

CAMERA SET UP - FOR YOU TUBE VIDEOS ONLY
Blue Yeti Microphone
Sony Handycam HDR CX4-05
Tripod – Manfrotto MKCompactaCN-BK

S O C I A L MEDIA 
B L O G : http://angelhandmadepapercraft.blogspot.com.au/
I N S T A G R A M : http://instagram.com/angelhandmadepapercraft
YOU TUBE: http://www.youtube.com/c/AngelHandmadePapercraft
F A C E B O O K: http://www.facebook.com/angelhandmadepapercraft
PINTEREST: https://www.pinterest.com.au/angelhandmadepapercraft


I was a 2018 Ambassador for Copic Marker Australia and NZ

Whimsy Stamps PC Elfie

Hey Everyone,

I am sharing with you today a card I made for Whimsy Stamps using PC Elfie from the April 2019 release.

She is a Digital Stamp so I have printed her out onto X-press It Blending Card using my Brother Laser Printer, I then coloured her up using Copic Markers, you will find these in the picture links and listed below.

I used patterned papers from Lilybee Design's Pinwheel 6x6 Paper Pad which I had cut down to size using Cutterpillar Pro and my Tim Holtz Guillotine (sometimes I mix and match with whatever is on my desk at the time).

I cut down one of the sentiments in the paper pad using my EK Success Cutterbee Scissors.

I used a mixture of American Tombow Mono Multi and Scotch ATG to adhere all my layers. I added a doily in-between the spotted paper and the other layers just using the liquid Adhesive.

I then adhered all the layers to a Couture Creations Card Base, I nice quick card for you today with not too many technical layers and things.

Finally I added some Wink Of Stella to my image and decorated the inside of the card.


I hope you have enjoyed my post today, if you have any questions feel free to send me a message or contact me via facebook (all links can be found below).

Watch the You Tube Video Here



Products Used On My Card (Affiliate Links Used Where Possible)



Copic Markers Used

E00, E00, E21, Ell, E04,R20
YR20,YR21,YR23
Y11,Y13,Y15
W1,W5
YG07,YG67
B00,RV00,
E15,E17
R35, N8


Thanks for stopping by, Deni

CAMERA SET UP - FOR YOU TUBE VIDEOS ONLY
Blue Yeti Microphone
Sony Handycam HDR CX4-05
Tripod – Manfrotto MKCompactaCN-BK

S O C I A L MEDIA 
B L O G : http://angelhandmadepapercraft.blogspot.com.au/
I N S T A G R A M : http://instagram.com/angelhandmadepapercraft
YOU TUBE: http://www.youtube.com/c/AngelHandmadePapercraft
F A C E B O O K: http://www.facebook.com/angelhandmadepapercraft
PINTEREST: https://www.pinterest.com.au/angelhandmadepapercraft


I was a 2018 Ambassador for Copic Marker Australia and NZ

Whimsy Stamps - Pig's Fly

Today I am here to share with you When Pig's Fly from Whimsy Stamps. I was totally in love with this image as soon as I had seen it and knew I wanted to use it as a Sympathy Card.

I printed the image onto Brother Laser Printer using X-Press It Blending Cardstock and then coloured the image up in blue combinations of Copic Markers.

I used patterned paper from The Craft Stall Mini Stack and plain cardstock from American Crafts as the matting layers. I added all the layers to a Couture Creations Card Base.

I ran a Puffy Clouds die from MFT Stamps die through Sizzix Big Shot, and I also ran the image through using Lawn Fawn Stitched Circle Die. I used my EK Success Cutterbee Scissors to carefully cut the edge of the bird wings so that I could pop them outside the die and didn't cut them off.

I added Wink Of Stella Clear to the Pig's Wings.

Finally I used some vellum to stamp onto using a sentiment from MFT Stamps All Occasion Sentiments, I used Ink On 3 Embossing Ink and my Fiskars Stamp Press (because the sentiment was so big I didn't have an acrylic block big enough). I used Ranger Super Fine White Embossing Powder and heated it using my heat tool. I adhered the sentiment strip to my card using some Tombow mono multi liquid adhesive.

I hope you have enjoyed my post today, if you have any questions feel free to send me a message or contact me via facebook (all links can be found below).

Watch the You Tube Video Here



Products Used On My Card (Affiliate Links Used Where Possible)



Copic Markers Used

YR20, YR16
R00, R01, R12, R32
B0000, B000, B00
B12, B14, B16

Thanks for stopping by, Deni

CAMERA SET UP - FOR YOU TUBE VIDEOS ONLY
Blue Yeti Microphone
Sony Handycam HDR CX4-05
Tripod – Manfrotto MKCompactaCN-BK

S O C I A L MEDIA 
B L O G : http://angelhandmadepapercraft.blogspot.com.au/
I N S T A G R A M : http://instagram.com/angelhandmadepapercraft
YOU TUBE: http://www.youtube.com/c/AngelHandmadePapercraft
F A C E B O O K: http://www.facebook.com/angelhandmadepapercraft
PINTEREST: https://www.pinterest.com.au/angelhandmadepapercraft


I was a 2018 Ambassador for Copic Marker Australia and NZ

Whimsy Stamps - Lady Marieta

Good Morning Everyone,

It is New Release week over at Whimsy Stamps and I have been lucky enough to work with PC Marieta for my post today.

I printed her out onto X-Press It Blending Cardstock using my Brother Laser Printer, Laser Printers are Copic safe which means you will have no bleeding through the ink.

I coloured her up using my Copic Markers which I will have all listed below, I then used my EK Success Cutterbee Scissors to fussy cut her out, finally to finish her off I used a Tombow Dual ended black marker to go around the outside and give her a gently black outline.

Using Uni-ball Signo White Angelic gel pen I added a few little details to her outfit, shoes and to the lady bug she is holding, I then went in and added some Wink Of Stella to the ladybug.

I used patterned papers from Crafter's Clearance Primary Basic, and American Crafts plain card stocks, I trimmed them down to size on my Cutterpillar Pro then adhered them to a Couture Creations Card base using Scotch ATG.

I ran a left over piece of the X-Press It Blending Card stock through my Sizzix Big Shot using a Lawn Fawn Stitched Circle die, I then used a sentiment from Studio Katia Birthday Greetings Stamp Set and stamped it out onto the circle using a Lawn Fawn Acrylic Block and some Memento Tuxedo Black.

I adhered the little lady and the sentiment down to the patterned paper using American Tombow Mono Multi Liquid Adhesive.

Lucky last I added some Tonic Studios Nuvo Crystal Does in Red Berry and Ebony Black to the middle of the stars on the patterned paper. Whilst the black was still wet I added the red to the centre. Most of them worked out perfect others not so perfect but I went with it anyway.

That is my card complete.


I hope you have enjoyed my post today, if you have any questions feel free to send me a message or contact me via facebook (all links can be found below).

Watch the You Tube Video Here




  Products Used On My Card (Affiliate Links Used Where Possible)



Copic Markers Used

E000, E00, E21, E11, E04, R20
R35, R37, R39
T6, T8, T10
E25, E27, E29
E30, E31

Thanks for stopping by, Deni

CAMERA SET UP - FOR YOU TUBE VIDEOS ONLY
Blue Yeti Microphone
Sony Handycam HDR CX4-05
Tripod – Manfrotto MKCompactaCN-BK

S O C I A L MEDIA 
B L O G : http://angelhandmadepapercraft.blogspot.com.au/
I N S T A G R A M : http://instagram.com/angelhandmadepapercraft
YOU TUBE: http://www.youtube.com/c/AngelHandmadePapercraft
F A C E B O O K: http://www.facebook.com/angelhandmadepapercraft
PINTEREST: https://www.pinterest.com.au/angelhandmadepapercraft


I was a 2018 Ambassador for Copic Marker Australia and NZ